RP25 Reflective Photo-electric Switch Set

• Can safely detect any reflective object
• Range 0.5 to 12m, depending on the type of reflector
• Insensitive against ambient light
• High degree of protection IP65
• Optional cable entry
• Large terminal compartment
• Adjustable optical polarizing filter
• Test input
• Protected against power supply polarity reversal
• RP25 operating voltage: 10...40VDC or 24VAC ±25%
• Relay output
• Easy adjustment of the optical sensor
• Alignment and contamination indicator
• Kit includes mounting brackets and round RD82 reflector with polarisation filters

Polarisation filter: Detects even "shiny" objects between the photo-electric switch and the reflector.

Large maximum range: Provides capacity to allow for dirt, rain, snow and fog.

Optional cable entry: Two break-out ports are provided in the casing. Cable entry can be from below or from the rear.

Immune to external light sources: The photo-electric switch is unaffected by external light sources or sunlight. High degree of protection: The hermetically sealed casing is suitable for exterior use.

Relay output: Potential-free changeover contact.

Protected against polarity reversal: The photo-electric switch is protected against power supply polarity reversal.

Terminal compartment: The RP25 has a large terminal compartment. The screw terminals can also be pulled out for easy connection.

Adjustment screws: Even when the casing is fixed in position, the photo-electric switch can be adjusted using three adjustment screws on the circuit board.

Soiling indication: If the photo-electric switch gradually becomes soiled, the red LED starts to flash before the photo-electric switch becomes ineffective.

Alignment indication: The alignment LED flashes red when the photo-electric switch is not optimally aligned to the reflector. Alignment OK = LED lights up green.